IVV59N wireless intelligent water flow control valve internal use NB wireless module, can remotely control the ball valve opening and closing degree, the upload frequency of the device, and whether to allow the indoor temperature collector to control the ball valve opening and closing degree of the product, the product internal use of ST's low-power chip, 3.7V lithium battery power supply,
The sleep state current is less than 5uA, and the internal lithium battery allows the device to operate continuously for more than 5 years.
Wireless remote control valves are suitable for controlling non-corrosive gases or liquids, and because the lithium batteries used for the product are powered by batteries rather than external power supplies, they are not suitable for use when the ball valve is often changed.
Power supply:
|
Built-in 3.6V non-rechargeable lithium battery
power supply
|
Battery life
|
for 10 years
|
Standby current
|
6uA
|
Operating current
|
120mA
|
Material:
|
National
standard brass valve body, flame retardant ABS protective cover
|
Valve body life
|
switch 100,000 times
|
The fitting tube segment
|
DN20,DN25,DN32,
etc. Output torque , 9N.
|
Material
|
National standard brass valve body,
|
Switch valve action time
|
less than 30s
|
Communication
|
NB Wireless
|
Maximum communication radius
|
1km
|
Spectrum Range
|
410-915 MHz
|
Wireless transmit power
|
17-20dBm
|
|
|
Light indicators, 5 LEDs
|
power
light/valve on/valve off light/communication light/fault light, standby LED
lights off, keys to show the appropriate status
|
Use water temperature range
|
2 to 95 degrees C
|
|